Monday, December 24, 2012

Merry Christmas to all !

December has just flown by.  It can't be Christmas already! So what have we done since I last wrote on here?

I mentioned back in September making some hard decisions and that I sold the F-550 flatbed.
Since then I sold the gooseneck trailer we used with it.
Then I bought a Fruehauf lowboy to pull with the semi
We made fenders for the semi tractors, then I too the low boy to a few miles north of Danville, Indiana and picked up a tractor we bought.  I found a 966 with a 2 point hitch, about as clean and perfect a used tractor as you can find.
 It came with a Bush Hog loader on it.  Aman put that on his 1086
I have the old Allis for sale
Along with the 3010
They are both great tractors with some history and sentiment involved, but the 966 will do everything they can and a little more.  And we can reduce our filter inventory quite a bit. We now have the bean planter in the shop, going through it. 
And other projects are on the white board.  I'm back playing with propane again.  Wabash Valley was needing someone part time and I don't have any corn to haul this winter.  I'm there 3 days a week unless they don't need me or I need to be someplace else for the farm. So that is a quick summary of our month

Friday, November 30, 2012

End of harvest 2012

FINALLY!
 This is the one we were looking for, taking the head off the combine for the last time in 2012.

I'll be honest, there were times when I didn't know if we would get done or just give up for the year.  But about 3:30 PM November 29, 2012 we finished harvest for the year.

2012 Harvest started May 30 with wheat. Six months later November 29 we finished grain sorghum.  How did it yield?

How 'bout them Cubs?

Thursday, November 22, 2012

The Conner ... er Winger ... er Dolson ... house

Places tend to get named around here.  For instance the house at 604 East Union to me is Rush Dolson's old house. To others it is Jim or Cindy Winger's or John or Cindy Conner's house.  Anyway, now it is history.  We got the property with the plan to make an access driveway to our field behind it.  Here are a few interesting photos.

From about 1976:
Summer 2012
Thanksgiving 2012
If you look closely you can see the concrete where Cindy's new addition was between where the photo was taken and the excavator.  I probably should have just taken out all the trees and made a field out of it, but I've probably gone way over budget getting it to this point.  And I haven't filled out any "Sodbuster" forms at the Farm Service Agency.

It's still a nice building site.  There are 2-3 really nice young oak trees, some cedars, lots of other trees still around.  It could become a large home site, a trailer court for several trailers, a place for a tool shed or seed warehouse, lots of possibilities.  And if you notice right in the middle of the bottom photo we have our entrance into the field.

We had planned to leave the old garage but it mysteriously caught fire.  I was at home doing paperwork (hadn't even been outside that morning) when one of my younger firefighters called.
"Ummm .... is that old garage where you took out the house supposed to be on fire?"
"Well, no, but if it is we're not going to try saving it."
By the time Aman and I got from my house to there it was fully involved.
Must have been those oily rags in the corner.  We're sure it wasn't arson, because it wasn't worth $150 as it was.

Robert said when he came over the hill the smoke was the same color as a burning track hoe. It was a bit disappointing, because there were two little persimmon trees just south of it I planned on saving.  The heat from the fire did enough damage we went ahead and removed a half dozen trees close to it we had not planned on taking out.  We are hoping that little oak tree in front of it didn't suffer any damage.  3-4 trees just south of it were smoking by the time the building collapsed.

Now for the real work, picking up sticks, sprouts, roots, leveling ... maybe it will snow tomorrow.

Saturday, October 20, 2012

Did something this morning I haven't done since May 30

I have been a regular on the AgTalk+ blog pages. In fact, I lead the list in number of entries there. My May 30 entry was my number 99.

I paused to ponder on something special for #100 and the spam postings, advertising posts, and non-blog entries ( things that are good questions someplace like Machinery Talk) just kind of blew up.  I decided to hold off on # 100 until I was happy with the blog site again.

I'm not sure I am happy, but it's time to reclaim the AgTalk+ Blog pages.  Funacres (John Jones from Lubbock, Texas) made a post he says will develop into a series of several blog entries over the next few weeks.  I'm going to commit myself to something similar. So I wrote number 100 this morning.  I encourage others to join in.  Write, comment, just set back and read.

Tuesday, October 16, 2012

So what did you do today ?

Sometimes you don't want to ask that question.  I might tell you.  If I say Stirator
that is enough explanation for a lot of people.  But maybe you haven't been blessed with working in one so here is the procedure:

Oh, normally this is done in a bin with corn drying, about 110 degrees F and 140% humidity.  Don't tell me that isn't possible until you've been in one.

1. Climb up grain bin, open man hole, put in hanging ladder, turn off Stirator.

2. Climb down ladder, remove ladder, carry across bin to Stirator and hang from track.

3 Climb ladder, adjust part.

4. Climb down ladder, remove ladder, carry across bin and hang from man hole.

5. Climb ladder, turn on Stirator, observe did not fix problem, turn off Stirator, climb down ladder and repeat step 2, 3, 4, 5, and 2 again.

6. Remove part, decide to borrow one from another Stirator, repeat step 4 then climb out of and down bin.

7. Get Gramp's old long wooden ladder from shed, carry to next bin, open, put up in wall, climb, tie to Stirator rail so ladder doesn't slide to the floor with you on it, examine Stirator (OK, could be several steps)

8. Realize this one has been upgraded and does not even have THAT part on it.

9. Reverse step 7.

10. Go to other bin, repeat step 1.

11. Repeat step 8 (Realize this one has been upgraded and does not even have THAT part on it either ) and reverse step 1.

12. Go to Mom's. get 25 ft ladder from shed and repeat step 7 with it

13. Remove part, climb down, take to original location, repeat 1, 2, 3 (except replace instead of adjust), 4, and .... most of 5.  It was a later model and was slightly, ever so slightly different.  So you remove the replacement part, reverse step 1,.

Here is the one I borrowed and the one needing repaired:

14. Go eat lunch.

15. Repair and modify old part, reinstall, test, pray and leave. (Yes, that did involve 1, 2, 3, 4, and 5 again.  I'm tired just writing them.)

It isn't hard work.  It isn't difficult work.  But it does try on you just a little.

Saturday, October 13, 2012

Watching the tractor plant wheat

For many years I was the wheat drill operator. Even during the time I had a full time career off-farm I usually took a few days and ran the drill.

To be honest I dreaded planting wheat.  You started early, worked late, ate dust all day and coughed it back up all night. You started the day wearing insulated coveralls, but by afternoon were down to a t-shirt and by the time you came in you were in the coveralls again.  If you worked hard you planted 90 acres in a day.
You were pulling a drill instead of the planter in that photo, but it was the same tractor and the drill was the same width. I was planting wheat Thursday thinking about how things have changed.
Now we are pulling a drill 30 feet wide that folds for transport to tractor width.  And the tractor not only knows where it is and where it should be, it steers itself to that point
So you turn the end, play George Jetson (push the button)
and set back and talk on the phone or answer text messages.  Oh and start late, plant that 90 acres and be done by 6 PM.

Way too easy.


Sunday, October 7, 2012

I think there is a problem

"Hello."

We're up here at ____. (A neighbor)'s irrigator engine is running and it looks like the end tower is upside down."

"I'll be there in a minute."

I find just what was described to me, an irrigator in a harvested field being ran dry to park. Except the last tower which is now a long way from the road is upside down.

Cell phone 1  ...  no answer, went to voicemail

House phone 1 ... no answer (may have been an answering machine.  If so I didn't leave a message)

House phone 2 ... no answer

Hose phone 3 ... answering machine.  Leave message or if emergency call (cell phone 2) or (cell phone 3)

Cell phone 3 ... went to voicemail

Cell phone 4 ... "Hello?"

"Hey, I'm at  ____ and the engine is running but it looks like the last tower is down."

" ...............  Ummmm ... Could you turn it off for me?"

I probably should have just done that to start with.   Curiosity go the best of me so I ventured out across the field in my pickup to find this
(It's really a better photo than I expected, as it was just at sundown with a cell phone camera)  Obviously a safety failed, but I didn't see any other problems ... well, except for that one little thing.

This is why I put contact numbers on all our irrigator pivot control boxes.