Monday, February 7, 2011

End of another era

Dad and I were discussing working on the roof of the old white corn crib a few years ago.  He was concerned about my being up on it trying to secure the metal roofing. I told him I wouldn't get on it again.

Well ... Monday I got on it again.  But I think Dad would have been OK with it
I was a lot closer to the ground at the time.

The crib had reached the point of not being safe to get on top of to maintain.  And even if you felt safe up there, the rafters had reached the point you couldn't nail the tin down. Screws still worked for the most part, but there were a few spots the only way to tie the tin down was run a wire around the board underneath and tie it.

We got everything out we wanted and called a friend who is a professional recycler.  Or "Scrapper" as he puts it.  If we had hauled the metal off we probably would have made a little cash, but not much. The difference between our hauling stuff off and him doing it is he knows the ins and outs of the business.  He sorts the various types and knows who is paying better for what and has enough volume to make the effort pay for him. So we said "Jim, come get it ... and stay off the roof" and left him alone.  The next day he called and said "The inside is done.  When you get the roof on the ground call me."

We had an I beam on the east side we wanted to save.  Monday morning I took the loader and picked up the rafters and pushed them to the side, the pulled the posts over.
After I had done everything I could with the loader we tied  a chain to some of the main supports, hooked it to the Magnum, and put the roof on the ground.
In the process I had to walk up a section of the roof already on the ground to tie a chain to another beam.  I had my YakTrax on my boots for walking on the ice 
... not a good combination for walking on roofing tin.  But there were enough nails sticking up to keep me from sliding very far.
So it is down and more cleanup is required.  Jim is going to get the tin off the roof, there's some iron inside we need to cut up to get out ... rods that were holding the walls from spreading and things like that we couldn't safely remove from the standing building.  Then we'll see what wood can be salvaged and get the rest hauled to a landfill.

Yeah, I know, dig a hole, shove it in and burn it.  Can't do that anymore.  We have to be environmentally correct.

Anyone want a souvenir?

Wednesday, February 2, 2011

A Mule?

This may surprise some people.  We bought a mule.
  Not THAT kind of mule, one like this:

We had 2 ATV's.  Dad bought a Kawasaki Bayou 220 back in 1995.  It was a good, reliable machine.  A little small statured and a bit underpowered. When we put the spot sprayer on it it was overloaded. A full sized man was cramped up driving it.  Last year I got a Polaris 330 through a promotion at Beck's Seed Company. It was better than the Bayou.  Bigger engine, larger frame, an OK bike.  But still not a real good work machine.  When we first got it we had trouble with the battery not holding a charge.  We took it back to the dealer who suplied it for beck's and they warrantied it.  Last Fall I had couple times it would not start.  If it was cold weather it would crank but until you put a charger on the battery to "top it off".  I got on it to use it last week and it wouldn't start.  We put the charger on it and once it was fully charged it started right up.  I said to myself "I bet I can fix that."

That's how I ended up at Sparks last week.  I stopped by and asked if they had any good used 4 wheel drive ATV's, and if they'd be interested in a 2 for 1 trade.  Leroy showed me very nice year old 650 Rubicon.

Great bike with a new set of tires on it.  I put down a deposit to hold it until next week when I could bring down both bikes for them to look at.

Monday Aman and I loaded up and went to Oblong.  We looked at the Rubicon while they lookedover our trade-ins  While we were looking at the Rubicon we also discussed how we would use it.  I finally came to the realization that while it was a good machine and would be nice, it really wasn't what we needed.  We needed to be able to carry 2 people and tools and supplies.  They had a basic Mule,
but for just a little more had an XC which has taller, more aggressive tires, and  a little heavier suspension.
and it is a little prettier.  I declined the opportunity to buy the $900 wheels they had on it.

That's how we ended up with a Mule.  It's not as sexy as a big red Rubicon ... that is like the Cadillac of ATV's.  It's a UTV, a Utility Vehicle. I guess this means I'm getting old?

The first thing I did with it was load the generator in the back and bring it home and park it in the chicken house.
I really hope it isn't needed.

Thursday, January 27, 2011

I'm impressed

We use 80/20 talc/graphite seed lubricant in the corn planter.  I wanted to stock up early because the last year or two it has been a little short supply in season.  We've checked various Rural King Supply stores, Big R, etc and not found ANY. I was getting a bit frustrated.

Aman, Ben, and I went to the show at Gordyville yesterday and I ran across the guys from Precision Seeding. 
We had purchased a few things from them in the past, and I asked about 80/20. Sure, no problem.  It's $xx.xx a jug and we'll ship it to you.  I said sure, send me 3 jugs. Didn't give the salesman anything but my business card.  I figured I'd get a call from a secretary in a day or two asking "..and how did you wish to pay for this?".

This afternoon I check the package box at the back door and inside is a box with 3 jugs of 80/20!
I'm impressed.

We finally got to haul some corn today. 
 I think when I win the lottery I'll put hopper bottoms under all the bins.  We also got to play with one of our new toys, the conveyor I bought late last fall


Worked pretty good.  Gotta run.  Later Y'all

Thursday, January 20, 2011

What a difference a week makes

It's January in Illinois.
That means one week you look out the back door to a beautiful morning
and a week later you're driving on the Angling Road through this

So ... what are we getting done on the farm?

Waiting

We're waiting on parts so we can get stuff out of the shop so we can put more stuff in the shop to work on and wait on more parts.  Right now we are waiting on a call from a trailer salesman.  We've been tossing back and forth whether to stretch the IH semi tractor and make a 10-wheeler out if it, of keep it a semi and get a trailer.

I can argue both ways with equal enthusiasm.

Yesterday we called a salesman who gave us a quote for a trailer and told him we'd take it if he'd deliver it.  He said he'd run some numbers and let us know.

So far he hasn't said yes or no.

We're also going to meetings.  Had to go to a meeting at Richard's Farm today.  Yeah, I know, bad job but someone has to do it.

Thursday, January 13, 2011

Decisions ... decisions

I did something kind of impulsive a few weeks ago and bought a single axle semi tractor


Good looking little tractor.  But we have been kicking around whether to get a short trailer or put a set of tandems under it, stretch the frame, and move the bed off the Ford on to it.


We've looked at a couple trailers.  One salesman even came out and looked at the Ford!


He hasn't got back with a price yet.  But he has a new 24 ft Maurer trailer that is pretty tempting.


Our biggest reservation isn't cost as much as figuring out if a trailer is the best move for us.  I don't think a long trailer would be a wise choice, but maybe a short one.  If we get a long trailer not only is it more difficult to maneuver, but it is substantially larger than everything else, which causes bottlenecks in harvest.

Decisions, decisions.

Sunday, January 9, 2011

Anyone need a modem?

I guess technology moves on. We are in the process of shuffling computers around.  We started to work on Mom's records when the hard drive died.  I wasn't too inclined to put much money and time in a Windows 98 machine, so we took the Xp computer from the tool room and moved it to the house.  I had another Xp machine at home we weren't using for much, so I'm taking it to the shop.  However, to use it in the shop it needed a wireless modem.  To install that I had to remove the telephone modem

I guess that is progress.

I'm also learning about wireless networking.  I got Sue a new laptop for her birthday.  The Lexmark printer in the office had wireless capabilities but I never tried getting it to work. So I sat down and configured her laptop, my laptop, and the netbook to work with it.  Amazingly, it worked!

Who knows, someday I might be current with technology.

Tuesday, January 4, 2011

Are we done celebrating yet?


I enjoy the holidays, I really do.  But between Christmas and New Year's and traveling and birthdays and anniversaries and visiting plus the regular day to day stuff ...  I haven't written much about the farm.  And now I getting ready for taxes.  I'll write more soon.  Be prepared for a tax rant.